Toshiba toshiba computer External monitor, The Keyboard, 4.Turn the computer’s power on, 1.Turn the computer’s power off, 3.Turn the external monitor’s power on

A500/A500D series

2.Click the Safely Remove Hardware icon on the Windows Taskbar.3.Click the eSATA device that you want to remove.

4.Carefully pull the eSATA device’s USB (eSATA combo) connector out from within the computer’s USB (eSATA combo) port.

External monitor

An external analog monitor can be connected to the computer’s external monitor port, with the computer supporting WUXGA video mode. In order to connect a monitor, follow the steps as detailed below:

1.Turn the computer’s power off.

2.Connect the monitor cable to the external monitor port and tighten the screws on the left and right hand side of the connector as required.

Figure 8-9 Connecting the monitor cable to the external monitor port

3.Turn the external monitor’s power on.4.Turn the computer’s power on.Some models are equipped with an external monitor port.

When you turn on the power, the computer will automatically recognize the monitor and determine whether it is a color or monochrome device. In the event that you find that there are issues getting an image displayed on the correct monitor, you should consider using the FN + F5 hot key to change the display settings (if you then disconnect the external monitor before you turn the computer’s power off, be sure to press FN + F5 hot key again to switch to the internal display).

Please refer to Chapter 5, The Keyboard, for further details on using hot keys to change the display setting.

You can use the HW Setup to select between Auto-Selected and System LCD Only displays. Refer to Chapter 7, HW Setup and Passwords.

User’s Manual 8-13