Troubleshooting
Real Time Clock
Problem
The following message is displayed on the LCD:
RTC battery is low or CMOS checksum is inconsistent. Press [F2] key to set Date/Time.
Procedure
The RTC battery charge has become exhausted, you should set the date and time in within the BIOS setup screen through the following steps:
1.Press [F2] key. BIOS setup will boot up.
2.Press [F5]/[F6] to set the date in [System Date].
3.Press [F5]/[F6] to set the time in [System Time].
Password
Problem | Procedure |
Cannot enter | Please refer to the TOSHIBA Password Utility |
password | section in Chapter 6, Power and |
| Modes for further information. |
|
|
Keyboard
Keyboard problems can be caused by the setup and configuration of the computer - please refer to Chapter 5, The Keyboard for further information.
Problem | Procedure |
Output to screen is | Please refer to your software's documentation to |
garbled | ensure that its is not remapping the keyboard in |
| any way (remapping involves changing or |
| reassigning the function of each key). |
| If you are still unable to use the keyboard, you |
| should contact your reseller, dealer or service |
| provider. |
|
|
User’s Manual |
