_INTRODUCTION
Using the Remote Control•With this Remote Control, you can operate your TV and most models of remote-
controlled VCR's and cable TV converters even if they are different brands. See next
page.
1Place the Remote Control face down and remove
the battery cover.
Press and slide
to remove.
CAUTIONS
• Do not throw your batteries into a fire. Dispose of
your batteries in a designated disposal area.
• Do not combine used batteries with new ones.
• Do not mix battery types.
Insert two "AA" size alkaline batteries, matching
the + and - signs oneach battery with the + and
- signs of the battery compartment,
Slide the battery cover shut until the lock snaps.
Tips for best operation
•For optimum performance, aim the Remote Control
directly at the TV from a distance of no more than 28
feet (8.5m). Be sure there is no obstruction between
the Remote Control and the TV.
• If your Remote Control does not always adjust the TV
as you wish, you probably need to replace the
batteries. Use alkaline batteries for longer use.
• If the Remote Control will not be used for a long
period of time or when the batteries are worn out,
remove the batteries to prevent leakage.
•Do not drop, dampen or disassemble the Remote
Control.
14
TV
Cable TV Converter
VCR
Other Video/audio Equipment
(REMOTE Video Disc Players,
stereo systems or additional
VCR's, etc.)
TV
CABLE
VCR
AUX
all the buttons
• POWER button
• CHANNEL A!V buttons
• Channel Number buttons
•RTNiENT button
• POWER button
•CHANNEL A!V buttons
•Channel Number buttons
• VCR function buttons
• RTN/ENT button
as Learning buttons;
•POWER button
• CHANNEL A/V buttons
• Channel Number buttons
• VCR function buttons
• RTN/ENT button
The function buttons not listed in the table above operate the TV as usual.