i_INTRODUCTION
Antenna/Cable TV

Connection (continued}

Generally, the incoming cable for acable TV system can be connected directly to the TV antenna terminal just like a
home antenna connection. (A-l)
But some cable companies offer "premium pay channels". Since the signals of these premium pay channels are
scrambled, a cable TV converter/decoder is generally provided to the subscribers by the cable TV company. This
decoder box is necessary for normal viewing of the scrambled channels. We recommend that you consult your cable
TV company for more specific instructions on installing cable TV. (A-2)
(.4-I) Cable without a decoder box (Unscrambled channels)
Cable lead-in
ANT'I OUT ANT-2

@

Note: You can connect another signal source, like a cable TV system or video game, to the ANT-2 terminal.
Refer to CAUTION on page 48.
(A-2) Cable with a decoder box (Unscrambled and Scrambled channels)
• The unscrambled channels will come through the
ANT-1 terminal whenever the ANT1/2 button on the
Remote Control, or the ANT/VIDEO button on the TV,
is in "ANT 1" mode.
•The scrambled channels from the decoder box will
come through the ANT-2 terminal whenever the
ANT1/2 button, or the ANT/VIDEO button, is in "ANT
2" mode.
•Set the TV and the VCR on channel 3 or 4 to match
the output channel of the converter.
Cable
lead-in
lIANT(75_)Nlil
ANT-1 OUT ANT-2

@@@

Note:
The decoding device may or may not be a part of the
cable converter.
IIN OUT I
Cable TV conveRer/
decoder
10