I _ GETTING STARTED

Programming ChannelS continued,
•If the AUTO CH PROGRAM function does not memorize any certain CABLE channels,
follow the "CHANNEL PROGRAM function" instructions below. (You will probably not
need to use this function.)
ADV -/+ 8
MENU
UP
To program channels of a specific TVICABLE mode
(TV •CABLE) (CH PROGRAM)
Press SET UP on the Remote Control
(or MENU on the TV) to display the
SET UP menu on the screen.
SET UP
AUTO CH P_AM
ADD-ERASE
TV'CABLE
OH PROGRAM
CH CAPTION
CH LOCK
CLOSED CAPTION
TO SELECT MENU
PUSH SET UP
TO CONTROL PUSH - +
2Press SET UP repeatedly on the
Remote Control (or ADV on the TV)
until "TV°CABLE" is displayed in
magenta.
SET UP
AUTO C,_ PRC_"]_TAI'vl
ADD ERASE
TV-CABLE
C_ PHr..XJ_AM
O_-_ CAP i ¸ _ON
CH L¢_']K
CLOSED CA_T I O_J
TO SELECT MENU
PUSH SET UP
TO CONTROL PUSH - +
3Press - or +until the mode that
corresponds to your TV signal
system is displayed in magenta.
Each time you press the button, the
TV, STD CABLE, HRC CABLE or IRC
CABLE mode will be selected in
order,
TV
STD CABLE
HRC CABLE
IRC CABLE
TO SELECT PUSH -+
Tuning band and Receivable channels
TVbroadcast
STD CABLE _
HRC CABLE _
IRC CABLE*
VHF: 2-13
UHF: 14-69
** 1-125
(Number on this TV)
Your cable company can advise you as to which system they are
using.
24