I _GETTING STARTED
Turning the TV On/Off(continued)
•Your TV has two separate antenna inputs (ANT-1 and ANT-2) that allow you to connect
two different signal sources, if desired.
E3I-II IIZIIZ]IZIIZ]
ANTNIDEO
ANT1/2 --
You can switch back and forth between the two signal sources by
pressing the ANT1/2 button on the Remote Control or the ANTNIDEO
button on the TV.
Using the ANT1/2 button (on the Remote Control)
Each time you press the button, the ANT 1
mode and ANT 2 mode will alternate.
The selected mode will be displayed in
magenta to show which antenna source
you are watching.
Select the mode that matches the antenna
terminal you use.
ANT 1
ANT 2
TO SELECT PUSH ANT 1"2
Note:
This button does not function in the
VIDEO mode. See page 62 for details on
using the VIDEO modes.
Using the ANT/VIDEO button (on the TV)
Each time you press the button, the ANT
1, VIDEO 1, VIDEO 2, VIDEO 3 or ANT 2
mode will be selected in order.
The selected mode will be displayed in
magenta to show which signal source you
are watching.
Press the button until "ANT 1" or "ANT 2"
is displayed in magenta to match the
antenna terminal you use.
VIDEO 1ANT 1
VIDEO 2ANT 2
VIDEO 3
TO SELECT PUSH ANT.VIDEO
Note:
This button functions as the ADV button
while any of four menu displays
(PICTURE, AUDIO, SET UP or OPTION) are
on the screen.
22