Toshiba TW56D90 owner manual I. ,I ir, lhllVLll i,,u 11,i.l, lhllVl I eei

I t.i_.] ,I ir_,_ lhllVLll :i,,u 11,i_.l, lhllVl I e]:[ei _ i

If you connect a VCR with an S-video connector to the cables to the AUDIO jacks of "VIDEO 1 INPUT" on the signals are separate.

"S-VIDEO" jack on the TV rear, you must also connect the audio TV rear. The S-video cable supplies video signals only. Audio

Optional cables

AudioS-video

outputsoutput

I

To select video input source

Turn on the TV and the VCR.

Press W/VIDEO on the Remote Control or ANT/ VIDEO on the IV to select "VIDEO 3' in the input

source selecting mode.

Operate your VCR normally.

Notes:

•If you connect a monaural VCR, connect the audio output of the VCR to the L!MONO jack of the VIDEO 1 INPUT jacks on the TV,

•Do not connect video equipment to both the "S- VIDEO" jack and the "VIDEO" jack of the VIDEO 1 INPUT jacks at the same time.

•The S-VIDEO INPUT jack accepts SEPARATED

Luminance/Chrominance (Y/C) signals conforming to the NTSC standard.

63