Satellite U500/U500D, Satellite Pro U500/U500D
For some functions, you can tap the TouchPad instead of pressing a control button.
Click: Tap the TouchPad once
Drag and drop:
1.Hold down the left control button and move the cursor to drag the item you want to move.
2.Lift your finger to drop the item where you want it.
Scroll:
Vertical: Move your finger up or down the right edge of the TouchPad.
Horizontal: Move your finger left or right along the bottom edge of the TouchPad.
Using the fingerprint sensor
Depending on the model purchased there is installed a fingeprint utility for the purpose of enrolling and recognizing fingerprints. By enrolling the ID and password to the fingerprint authentication device, it is no longer necessary to input the password from the keyboard. Just by swiping the finger against the fingerprint sensor, the following functions will be enabled:
■Logon to Windows and access a
■Files and folders can be encrypted/decrypted and third party access to them prevented.
■Disable the
■
■Authentication of the User Password and Hard Disk Password when booting up the computer.
To “swipe” refers to the action of reading a fingerprint using the fingerprint sensor.
How to swipe the finger
Using the following steps when swiping fingers for fingerprint registration or authentication will help to minimize authentication failures:
1.Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you.
2.While lightly touching the sensor, swipe the finger towards you until the sensor surface becomes visible.
3.Ensure the center of the fingerprint is on the sensor when swiping the finger.
User’s Manual |