Real Time Clock
ProblemProcedure
The BIOS setting and system date/ time are lost.
The lasting time of the Real Time Clock (RTC) has run out - you will need to set the date and time in the BIOS setup utility by using the following steps:
1.Launch the BIOS setup utility.
Please refer to TOSHIBA Setup Utility section for further information.
2.Set the date in the System Date field.
3.Set the time in the System Time field.
4.Select Save and Exit
5.Select Yes - the BIOS setup utility will end and the computer will restart.
Internal display panel
Apparent computer's display panel problems may be related to the computer's setup and configuration.
Problem | Procedure |
Markings appear on | These marks may have come from contact with |
the computer's | touch screen. You should try to remove the marks |
display panel. | by gently wiping the display panel with a clean dry |
| cloth or, if this fails, with a good quality LCD screen |
| cleaner. In this latter instance you should always |
| follow the instructions with the screen cleaner and |
| always ensure you let the display panel dry |
| properly. |
|
|
Memory Media Card
For further information, please refer to Operating Basics.
Problem | Procedure |
Memory media card | Remove the memory media card from the |
error occurs | computer and then reinsert it in order to ensure it is |
| firmly connected. |
| If the problem persists, then you should refer to the |
| documentation supplied with your memory media |
| card for further information. |
|
|
User's Manual |
