Toshiba WT8-B, WT10-A user manual External Display, Hdmi device

The AC adaptor should not be disconnected with the "USB Data and Charge Y-Cable" if it is connecting with USB device and tablet at the same time. If the USB device works with USB bus power, which comes from "USB Data and Charge Y-Cable", the disconnection of AC adaptor would cause power loss. Even if the USB device has its own power source, the device will stop around 60 miliseconds because USB controller would detect with “no bus power” due to sudden disconnection with AC adaptor. The disconnection may cause data loss and thus Windows may detect error and start data recovery.

Charging the tablet via connecting the "USB Data and Charge Y- Cable" will need 1.5A for charging, and if a USB device is connected to the tablet, it will need 2A for charging. In this case, when charging from PC’s USB port which only supports 1A, the power supply may stop working.

When using “USB Data and Charge Y-Cable”, there might be a possibility that power charging to the tablet might not work. Possibility will get higher if the USB device connected with the “USB Data and Charge Y-Cable” is non-standard USB 2.0 device.

Tablets other than TOSHIBA WT10-A and TOSHIBA WT8-B cannot support "USB Data and Charge Y-Cable".

External Display

Your tablet video capabilities can be enhanced with additional displays.

External displays allows you to share your desktop or extend the desktop area.

HDMI device

HDMI feature is only provided with TOSHIBA WT10-A models.

The tablet is equipped with a Micro HDMI port that can send video by connecting with external devices. Your tablet supports 1080p, 720p signal format. The available format depends on the HDMI device you are connected to.

To connect an HDMI-compatible display device, follow the steps as detailed below:

As the port operation of all external display devices have not been confirmed, some devices may not function properly.

To connect a device to the Micro HDMI port, you must purchase a suitable HDMI cable.

1.Plug one end of the HDMI cable into the HDMI in port of the HDMI display device

User's Manual 4-11