2. Plug the other smaller connector of the Micro-USB cable into the
Micro-USB port on your tablet.
You can also eatablish connection through the provided "USB Data
and Charge Y-Cable". Please refer to the USB device section for more
details.
Figure 2-2 Plugging the Micro-USB cable into tablet (TOSHIBA WT10-A)
2-pin
3-pin
Figure 2-3 Plugging the Micro-USB cable into tablet (TOSHIBA WT8-B)
2-pin
3-pin
Product appearance depends on the model you purchased.
The Micro-USB connector of the Micro-USB cable must be correctly
plugged into the Micro-USB port on the tablet. Failure to do so correctly
may result in possible damage to the Micro-USB port.
3. Plug the AC adaptor into a live wall outlet.
Turning on the power
This section describes how to turn on the power.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
User's Manual 2-5