31
OPERATION
PROCEDURE
●Function Menu: Pressing in "EMB START" mode.
Machine Setting
Stitch / RPM
Change the selection with the hoop travel keys and .
Thread breakage sensor (OFF / 1 - 5)
Change the selection with the hoop travel keys and .
Press the SET key to set the bobbin counter.
* Bobbin counter setting
Counter data (Actual accumrated value): Max. 999999
stitches
(Can be cleared)
Preset data (Preset accumrated value): Max. 999999
stitches by Numeric keys
Lock stitch (So: Yes at start / S-: No at start; Eo : Yes at end /
E-: No at end)
Change the selection with the hoop travel keys and .
Satin stitch adjustment
(-: No adjustment / 1 - 5: Adjustment in 0.1 mm units)
Change the selection with the hoop travel keys and .
Slow start (2 - 9 stitches)
Change the selection with the hoop travel keys and .
Trimming in jump (0 - 9 stitches)
Change the selection with the hoop travel keys and .
Jump length (OFF / 4.0 - 9.9 mm)
Change the selection with the hoop travel keys and .
Trimming length (1 - 17)
Change the selection with the hoop travel keys and .
Machine Setting
Trimming timing (–10 - +10)
Change the selection with the hoop travel keys and .
Communication speed (9600 / 19200 / 38400)
Change the selection with the hoop travel keys and .
Machine No. (0 - 3)
Change the selection with the hoop travel keys and .
FD07
1
2
3
a
b
*** FUNCTION MENU **
1DISPLAY ST
2.THRED SNS 2
3.BOBBIN CNT [SET]
.
2
3
1
**** BOBBIN CNT ****
COUNTER 1278 ST
PRESET 30000 ST b
a
4
5
6
*** FUNCTION MENU **
4.LOCK ST. So Eo
5.SATIN ADJ. 2
6.SLOW START 2 ST 6
5
4
7
8
9
*** FUNCTION MENU **
7.TRIM JUMP 3 ST
8.JUMP LNGTH 6.0mm
9.TRIM LNGTH 3
7
9
8
A
B
C
*** FUNCTION MENU **
A.TRIM TMNG +0
B.COM SPEED *38400
C.MACHINE *1
A
B
C