OPERATION
PROCEDURE
82
OFFSET
This function moves the hoop to the position set as the offset position and
returns the hoop to the originally located position after finishing the work.
For offset, automatic/manual setting is possible (hoop setting).

1. Manual Offset

Pressing the MOVE HOOP key (offset key) while the machine is at a still
causes the hoop to travel to the offset position. Pressing the offset key again
returns the hoop to the previously located position.
<Example: Arranging applique>
(1) Stop the machine.
(2) Move the hoop to the offset
position.
(3) Arrange the applique.
(4) Return the hoop to the previ-
ously located position.
Setting a pause at color
change (Page 61) will facilitate
arranging such as applique.
FD07
Offset position
Stop position