OPERATION
PROCEDURE
83
2. Automatic Offset
Set "AUTO" for "OFFSET" in hoop setting with the offset position set, and the
hoop travels to and stops at the offset position after the completion of embroi-
dery.
<Example: Changing the hoop>
(1) End of embroidery
(2) The hoop travels to the offset
position automatically.
(3) Remove the hoop.
(4) Attach the new hoop.
(5) Press the START key. The
hoop travels to the design start
position and embroidery starts.
When embroidering the same
design, set "AUTO" for START
PNT (Page 50) to embroider
the design from the same start
point.
Design start position
Offset position
End position of
embroidery
FD07