44
OPERATION
PROCEDURE
JUMP LENGTH
Sets the condition (length) for converting stitches into jump. Stitches longer
than the set length are converted into jump.
1 Change the display to FUNCTION MENU.
2 Change the displayed items.
3 Select "8. JUMP LNGTH" (length of stitch).
4 Select the setting.
Setting: OFF, 4.0 ... 9.9 (ST)
- OFF: Does not insert.
Keep pressing or , and the
value changes quickly.
5 Press [SET] to confirm the setting.
6 End of operation
FD07
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1
Press .
*** FUNCTION MENU **
1DISPLAY ST
2.THRED SNS 2
3.BOBBIN CNT [SET]
.
Press the FUNCTION menu key
twice.
*** FUNCTION MENU **
7 TRIM JUMP 3 ST
8.JUMP LNGTH 6.0mm
9.TRIM LNGTH 3
.Move the cursor using (hoop
travel key).
Select "OFF", "4.0"... or "9.9" using
the following keys:
　　　and　　　(hoop travel keys)
*** FUNCTION MENU **
7.TRIM JUMP 3 ST
8 JUMP LNGTH 6.0mm
9.TRIM LNGTH 3
.
*** FUNCTION MENU **
7.TRIM JUMP 3 ST
8 JUMP LNGTH 6.0mm
9.TRIM LNGTH 3
.Press .
***** EMB START ****
AISIN123.10O 1
0/ 1027
01/15: 23456789AB<D>
1