TP-Link TD-W8910GB manual PPPoE, Mer

TD-W8910GB54M Wireless ADSL2+ Router User Guide

The information is same as the information in Figure 4-3.

2.PPPoE

If you choose PPPoE in the previous screen (shown in Figure 4-5), the configuration is similar to PPPoA, the only difference is that you should set the PPPoE Service Name on the corresponding screen. You can refer to Chapter 4 to achieve the configuration for the connection type.

3.MER

If you choose MER in the previous screen (shown in Figure 4-5), you can see the screen (shown in Figure 4-9). Follow the instructions to configure the connection.

Figure 4-9

1)Configure the WAN IP Address. If you are provided a dynamic IP Address, please select obtain an IP address automatically, and then the Router will automatically get IP parameters from your ISP. If you are provided with a static IP Address, please select Use the following IP Address, and then enter the WAN IP Address and WAN Subnet Mask.

2)Configure the default gateway. If you are provided a dynamic gateway address, please

23