TP-Link TD-W8910GB 4.4.2 LAN

TD-W8910GB 54M Wireless ADSL2+ Router User Guide
27
The information of the figure shows above is same as the information in the Figure 4-3.
4.4.2 LAN
Choose “Advanced Setup”Æ“LAN”, and you will see the LAN screen (shown in Figure 4-14)，the
section allows you to configure the Router’s LAN ports settings.
Figure 4-14
¾ IP Address: You can configure the Router’s IP Address and Subnet Mask for LAN Interface.
 IP Address: Enter the Router’s local IP Address, then you can access to the Web-based
Utility via the IP Address, the default value is 192.168.1.1.
 Subnet Mask: Enter the Router’s Subnet Mask, the default value is 255.255.255.0.
¾ Enable UPnP: If you need the UPnP function, select the check box to enable it.
¾ Enable IGMP Snooping: If you select the option, please choose the IGMP Mode: Standard
Mode or Blocking Mode.