TP-Link TD-W8910GB manual 4 NAT, Virtual Servers

TD-W8910GB54M Wireless ADSL2+ Router User Guide

Figure 4-15

If you want to specify the MAC address of TD-W8910GB as your PC’s, you can press Clone MAC Address on the screen. Then click Save button to save your setting.

4.4.4NAT

When you select PPPoA or PPPoE for the WAN Setup, or when you select Enable NAT (shown in Figure 4-10)for the type of MER or IPoA connection, you will see the NAT menu in the Web-based Utility (shown in Figure 4-16).

Figure 4-16

Choose “Advanced Setup”Æ“NAT”, there are four submenus under the main menu: Virtual Servers, Port Triggering, DMZ Host and ALG. Click any of them, and you will be able to configure the corresponding function.

4.4.4.1. Virtual Servers

Choose “Advanced Setup”Æ“NAT”Æ“Virtual Servers”, you can set up virtual servers on the screen below (shown in Figure 4-17).

Virtual servers can be used for setting up public services on your LAN, such as DNS, Email or FTP. A virtual server is defined as a service port, and all requests from the Internet to this service port will be redirected to the computer specified by the server IP. Any PC that was used for a virtual server must have a static or reserved IP Address because its IP Address may change when using the DHCP function.

30