TL-PS110P Single Parallel Port Fast Ethernet Print Server
8.Then the print server web management page will appear, with which you can configure all print server settings.
Figure
9.Click “Setup” and then choose “TCP/IP”. Check “Use the following TCP/IP Settings” radio button and then fill in the following parameters.
¾IP Address: Specify an IP address for your print server. The IP address must be within the same subnet as your Router. For example, if the LAN IP address of your Router is 192.168.1.1, the IP address should be set to 192.168.1.X (1<X<255). 192.168.1.10 is suggested.
¾Subnet Mask: Enter the subnet mask of your network.
¾Default Router: Enter the LAN IP address of your wireless router or access point. Here takes 192.168.1.1 for example.
18
