| Web Smart Gigabit Switch Family User's Guide |
|
|
DHCP Client: Indicates whether the DHCP function is enabled. If DHCP client is enabled, the switch will obtain the IP address, netmask and default gateway from the DHCP server automatically; otherwise, these three items should be configured manually.
IP Address: Is necessary for switch management. The configuration of switch IP address must be compliant with the subnet layout.
Default Gateway: Serves as the default destination when a packet whose destination IP address is not within the switch’s subnet is to be forwarded.
Notice:
1)When DHCP client is enabled, the IP parameters are obtained automatically from the DHCP server, so the “IP Address”, “Netmask” and
“Default Gateway” fields are disabled. These parameters can be queried on the DHCP server.
2)The initial state of the DHCP client is disabled and the initial IP address is 192.168.0.1.
5.3.3.2 Static MAC Address
This page provides the function of adding, searching a static MAC address and changing the entry state, as shown in figure
Figure 5-24 Static MAC address
42
