TP-Link TL-SG2224WEB, TL-SG2216WEB manual Switch Aspect Description, AC Power, Front Panel

TL-SG2216WEB/TL-SG2224WEB Web Smart Gigabit Switch Family User's Guide

2.Insert the switch into the rack.

3.Fix the switch to the rack with the rack screws (not provided).

3.1.3 AC Power

The switch can be used with an AC power supply 100 to 240V AC, 50 to 60Hz. The switch’s power supply will adjust to the local power source automatically.

3.2Switch Aspect Description

3.2.1 Front Panel

The front panel of TL-SG2216WEB is configured as follows:

R	2	4	6	8								10	12	14	16
TL-SG2216WEB				1	2	3	4	5	6	7	8				9	10	11	12	13	14	15	16
							Link/Act											Link/Act
Power	FAN2
System	FAN1
16-port Gigabit Web-Smart Switch	1	3	5	7			1000Mbps					9	11	13	15		1000Mbps

Figure 3-2. TL-SG2216WEB Front Panel

SFP 1 SFP 2

RESET

16 10/100/1000Mbps RJ-45 GIGA ports: designed to connect to the device with a bandwidth of 10M, 100M or 1000M. Each has a corresponding Link/Act and 1000Mbps LED.

SFP ports: designed to install the SFP module. It uses the Link/Act LED of the GIGA ports with which compose a combo port (see 5.2.1 for details of combo ports).

Reset Button: Press this button for three seconds to the reset software setting back to factory default setting.

LEDs

1)Power LED: Will be solid red when power is supplied to the switch and is operating normally.

2)System LED: Will flash green when the CPU of the switch is working