TP-Link TL-SG2224WEB, TL-SG2216WEB manual Port Statistic

TL-SG2216WEB/TL-SG2224WEBWeb Smart Gigabit Switch Family User's Guide

Notice:

Though the SFP module support hot-plugging,but the configuration of Duplex Mode could not change automatically,after switching between UTP,100M SFP and 1000M SFP on the combo port,please modify its Duplex Mode manually or re-electrify the switch to make sure the configuration is correct. The 100M SFP should be set to "100M FD" and the 1000M SFP should be set to "AUTO" or "1000M FD".

Further explanation:

1)By operating on fields in the All Ports line expediently, you can set the values of all ports in the corresponding field. Some other setting pages offer the same function.

2)Parameters of Trunk member ports are configured with default values (see the Appendix B table) and cannot be configured here (see port 5 and 6 in the figure for example).

5.3.2.2 Port Statistic

This page displays the port statistic, it contains the following entries:

Figure 5-19 Port Statistic

36