| Web Smart Gigabit Switch Family User's Guide |
|
|
VLAN ID: configure the VLAN ID.
Port: The switch port number.
Member: Select the member of the VLAN here. If this field is checked, it indicates that the port belongs to the current VLAN.
Egress Frame: The solution to the egress frame. "Drop Tag" indicates drop the tag header before sending the frame. "Add Tag" indicates add the tag header before sending the frame.
Description: Display the
All Ports: By operating on this field expediently, you can set the values of all ports in the corresponding field.
All VLAN: Display all defined Tag VLANs.
Figure 5-37 All Tag VLAN
Select All: Select all ports to be VLAN members.
Clean Up: Clean up all members of the VLAN.
Submit: Submit to buildup a VLAN with the selected members.
Notice:
1)VID of the VLAN must be unique and within the range of 1 to 4094.
2)At least two port members should be included to add a VLAN group. (If the page is submitted with 0 VLAN member, it indicates to delete the VLAN.)
3)If any Trunk has been set, the Trunk can be configured as a VLAN member and member ports of the Trunk cannot be configured (see Port 1 and 2 in the figure for example).
55
