TP-Link TL-SG3424 manual Rack Installation

L2 Managed Switch

Feet

Bottom of the

Device

Notch

FFFFFFFFFFFFDesktop Installation

■■ Rack Installation

To install the device in an EIA standard-sized, 19-inch rack, follow the instructions described below:

111 Check the grounding and stability of the rack.

222Secure the supplied rack-mounting brackets to each side of the device with supplied screws, as illustrated in the following figure.

Rack- mounting Bracket

Screw

FFFFFFFFFFFFBracket Installation

333 After the brackets are attached to the device, use suitable screws (not provided\ to secure the brackets to the rack, as illustrated in the following figure.

Rack

FFFFFFFFFFFFRack Installation

Caution:

■■ Please set 5~10cm gaps around the device for air circulation. ■■ Please avoid any heavy thing placed on the device.

■■ Please mount devices in sequence from the bottom to top of the rack and ensure a certain clearance between devices for the purpose of heat dissipation.

Installation 09