Transition Networks MIL-SM2401MAF Txperiod, Supptimeout, Servertimeout, Maxrequest, Reauthperiod

Transition NetworksMIL-SM2401MAF

		Use the 802.1x misc TX		Switch (config)#
8021x misc		period global		8021x misc
		configuration command		txperiod 5
txperiod [sec.]	Global
		to set the TX period.
Or	configuration		30 sec.
				(Default)
no 8021x	mode
		Use the no form of this		Switch(config)# no
txperiod
		command to return to		8021x misc
		the default value.		txperiod
8021x misc	Global	Set the period of time		Switch (config)#
		the switch wait for a
supptimeout	configuration		30 sec.	8021x misc
		supplicant response to
[sec.]	mode			supptimeout 30
		an EAP request.
8021x misc	Global	Set the period of time		Switch (config)#
		the switch waits for a
servertimeout	configuration		30 sec.	8021x misc
		server response to an
[sec.]	mode			servertimeout 50
		authentication request.
		Set the number of
8021x misc	Global	authentication that must		Switch (config)#
		time-out before
maxrequest	configuration		2	8021x misc
		authentication fails and
[Number]	mode			maxrequest 2
		the authentication
		session ends.
8021x misc	Global	Set the period of time		Switch(config)#
		after which clients
reauthperiod	configuration		3600	8021x misc
		connected must be
[sec.]	mode			reauthperiod 20
		re-authenticated.
8021x prostate		Use the 802.1x port		Switch (config)#
	Interface	state interface		interface
[reject accept
	configuration	configuration command	N/A	fastethernet 0/3
authorize
	mode	to set the state of the		Switch (config-if)#
disable]
		selected port.		8021x portstate
24-Hour Technical Support: 1-800-260-1312			International: 00-1-952-941-7600
		44