Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
61
the port from learning any new MAC addresses, and then use the static MAC
addresses function to define a list of MAC addresses that can access to secure
port.
Click
Apply
button to apply all configuration.
The port current configuration also will be displayed when the port is selected.
Port Control interface
The Link Aggregation Control Protocol (LACP) provides a standardized means for
exchanging information between Partner Systems o n a link to allow their Link
Aggregation Control instances to reach agreement on the identity of the Link
Aggregation Group to which the link belongs, move the link to that Link Aggregation
Group, and enable its transmission and reception functions in an orderly manner. Link
aggregation lets you group up to 4 ports into one dedicated connections. This feature
can expand bandwidth to a device on the network. L ACP operation requires
full-duplex mode, more detail information refers to IEEE 802.3ad.
Aggregator setting
System Priority: A value which is used to identify the active LACP. The switch
with the lowest value has the highest priority and is selected as the active LACP.