Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
58
Priority Queue Service settings: Select the priority queue service type.
801.1p Priority
First Come First Service: The sequence of packets sent depend on arriving
order.
All High before Low: The high priority packets sent before low priority
packets
Weighted Round Ratio: Select the preference given to packets in the
switch's high-priority queue. T hese options represent the number of high
priority packets sent before one low priority packet being sent. For example, 5
High: 1 Low mean s that the switch sends 5 high priority packets before
sending 1 low priority packet.
Qos Policy (Checked for High Priority): 0 ~ 7 priority level can map onto high or
low queue.
Collisions Retry Forever:
Disable (in half duplex): When collisions occur, the system will retry 48
times and then drop frame.
Enable (in half duplex): When collisions occur, the system will retry forever.
Hash Algorithm: CRC Hash or Direct Map for MAC address learning algorithm.
IFG Compensation: Enable or disable Inter Frame Gap time compensation.
802.1x Protocol: Enable or disable 802.1x protocol.
IGMP Query Mode: Recognizes different queries from clients or servers to decide
which Query will be the first priority. The modes are:
a. Auto Mode: Choose the switch that has the lowest IP address to be set as
the IGMP Query mode.
b. Enable Mode: Enables the switch to be the IGMP Querier.
c. Disable Mode: Disables the query function of the switch.