Panasonic 8900 SH installation manual Entry Code Details, Series 8900SH Control Panel, Section

Series 8900SH Control Panel Operation And Installation Manual

SECTION 8: ENTRY CODE DETAILS

This section provides more detail to better understand the control panel Entry Codes.

The Keypad is used to (i) provide instructions to the computer (ii) read, via the display LED’s, what current settings are stored in memory, and (iii) aid in monitoring the system after the settings are complete.

KEYPAD WITH ENTRY PROCEDURES

1	2	3
4	5	6
7	8	9
∗	0	#

1.Press the appropriate two digit Entry Code.

2.Wait for the Entry Code in the display to begin flashing.

3.Enter the desired temperature, value code, etc.

4.Press the pound sign # to save the displayed entry.

Press the star sign ∗ to abort an unwanted entry to prevent it from being saved and to revert back to the last display code viewed. To discontinue the entry procedure, press the star sign to start over.

ENTRY CODE 21: OUTSIDE TEMPERATURE SHUTDOWN SETTING

PRESS	2	+	1	= ENTRY CODE
ENTER YOUR CHOICE
					6
PRESS		= SAVE KEY
	#

0

FOR AN OUTSIDE TEMPERATURE SHUTDOWN SETTING OF 60°F. THE AVAILABLE RANGE IS + 0°F to + 120°F

This code shuts down all boilers when the outside temperature reaches or goes above a specified point and turns on the boilers when the outside temperature drops below the specified point. A common setting is around 60°F degrees.

Section 8 Entry Code Details