802.1x Setup interface
System Configuration
After enabling the IEEE 802.1X function, you can configure the parameters of this function.
1.Select <Edit>
2.Radius Server IP: set the Radius Server IP address.
3.Shared Key: set an encryption key for using during authentication sessions with the specified radius server. This key must match the encryption key used on the Radius Server.
4.NAS, Identifier: set the identifier for the radius client.
5.Server Port: set the UDP destination port for authentication requests to the specified Radius Server.
6.Accounting Port: set the UDP destination port for accounting requests to the specified Radius Server.
7.Select <Apply>
101
