IP Address
User can configure the IP Settings and DHCP client function, than clicks
Apply | button. |
After reset the IP address, you must reboot the switch.
1.DHCP Client: “Enable” is to get IP from DHCP server. “Disable” is opposite. The DHCP client function only works if you haven't assigned a static IP address that different than the switch default IP. Once the default IP has been changed the DHCP will not effective and the switch will continue using the manually entered static IP. If you have changed the switch to a static IP address, you can set the IP address back to its default IP address or you can reset the switch back to factory default. And then you can enable the DHCP client function to work.
2.IP Address: assign the switch IP address. The default IP is 192.168.1.77
3.Subnet Mask: assign the switch IP subnet mask.
4.Gateway: assign the switch gateway. The default value is 192.168.1.254
IP configuration interface
Switch Setting
119
