Transition Networks MIL-SM2401MAF The 1000Base-FX, module only, supported for speed, 1000 & auto

		￿ The 1000Base-FX
		module only
		supported for speed
		1000 & auto
		Use the flow control
		configuration
		command on Ethernet		Switch (config)#
flowcontrol on	Interface	ports to control traffic		interface
or no	configuration	rates during	On	fastEthernet 0/1
flowcontrol	mode	congestion.		Switch (config-if)#
		Use the no form of this		flowcontrol on
		command to disable
		security on the port.
		Use the security
		configuration		Switch (config)#
security on or	Interface	command on Ethernet		interface
	configuration	ports.	Disable	fastEthernet 0/1
no security
	mode	Use the no form of this		Switch (config-if)#
		command to disable		security on
		security on the port.
		Use the priority
		configuration		Switch (config)#
priority on	Interface	command on Ethernet		interface
[high low] or	configuration	ports.	Disable	fastEthernet 0/1
no priority	mode	Use the no form of this		Switch (config-if)#
		command to disable		priority on high
		security on the port.

26