|
| Enabling or disabling per port power output | |
[3]. Set Port PwrLimitClass. | limit. When is enabling, per port power | ||
(ON/OFF) | output limit will follow the value that set in | ||
|
| power limit max. | |
|
|
| |
[4] | Set Port PwrLimitManag. | Enabling or disabling the port power limit | |
management for power supply | |||
(ON/OFF) | |||
management. | |||
|
| ||
|
|
| |
[5] | Set Port DetectLegacy | Enabling the port power legacy detect. | |
|
|
| |
[6] | Set Port Priority (1:C 2:H 3:L) | Set port priority for the power supply | |
management. | |||
|
| ||
|
|
| |
[7] | Set Power Limit Max (<15400) | Set the port power output limit value. The | |
maximum value must less than 15400. | |||
|
| ||
|
|
| |
[a] Auto Refresh [OFF] | Enabling or disabling auto refresh system | ||
parameters. | |||
|
| ||
|
|
| |
|
| Set the total port power limit. When the | |
[t] Set Total Power Limit | Power Management is enabling, this | ||
|
| function will show up. | |
|
| ||
[n] Next Page | Switch to next page | ||
|
|
| |
[0] | Exit | Exit POE Menu mode | |
|
|
|
Save Configuration
You must save the configuration to the flash memory when you have changed the configuration. Otherwise, the new configuration will be lost when the switch restart or power off.
111