Paxar 9403 L o a d i n g F o r m a t H e a d e r I n f o r m a t i o n, 38Configuring the Printer

F l a s h C o n s i d e r a t i o n s

Note the following items when storing formats, graphics, or check digits in flash:

Packets with the same number should not be added to flash memory. If two packets with the same number are stored in flash, only the last packet sent can be used. For example, if you send the following packets to flash memory, only the "Textiles" format can be used.

{F,10,A,F,E,300,200,"UPC"p

p}	Flash
	Selector
{F,10,A,F,E,300,200,"Textiles"p
p}

Clear flash memory if you encounter problems storing packets. Flash must be cleared through the printer’s menu.

Individual packets cannot be cleared from flash memory. Clearing flash erases all packets stored in flash memory (with "F" selector); however, clearing flash does not erase any packets loaded by Service.

Flash cannot be reallocated.

U p l o a d i n g F o r m a t H e a d e r I n f o r m a t i o n

You can upload format header information from the formats in memory to check the supply length and width for each format. You can use this packet on the 9825, 985x, or 9860 printers, because formats remain in memory when you turn off these printers.

Syntax	{header,format#,action,device p }
F1. header	Format Header
F2. format#	Format number from 0-999. 0 is for all formats in memory.

2-38Configuring the Printer