Paxar 9403, 9402 manual

Models: 9402 9403

1 294
Download 294 pages 19.52 Kb
Page 180
Image 180

285The storage device type in the memory configuration packet must be N (non-volatile RAM) or R (volatile RAM).

286The buffer size is invalid.

287The printhead width must be 0.

288The battery voltage must be 0 (15-volt battery) or 1 (12-volt battery).

289The printer address specified in the communication settings packet must use exactly six characters.

290Action must be 0 (disable), 1 (enable), or 2 (extended) for the backfeed control packet or the printer is active.

291Dispense position must be 50 to 200 dots or the printer is active.

292Backfeed distance must be 10 to 200 dots or the printer is active. The backfeed distance can not be greater than the dispense position.

293The skip index selection defined in the field must be 0 (disabled) or 1 (enabled). Correct the packet and resend to the printer.

310Check digit scheme number must be 1 to 10.

311Modulus must be 2 to 11.

314Check digit algorithm must be D (sum of digits) or P (sum of products).

325Duplicating direction must be 0 (insert after) or 1 (insert before) in duplicate fields for graphics.

8-14Diagnostics and Errors

Page 180
Image 180
Paxar 9403, 9402 manual