Use the following table to see how much memory is availabl e to
reallocate.
RAM* 9403 9825 9850 9855/9860
Volatile RAM 256K 1 Meg 4 Meg 8 Meg
Non-volatile RAM NA NA 512K NA
* You cannot reallocate more memory than what is available, or you will receive an error.
Extended memory is available on the 9855 and 9860 print ers.
Checking Current Buffer Sizes
Send a configuration upload packet to check the sizes of your
current buffers. See "Configuration Packet Header" for more
information. After you check your current buffer sizes you can
begin reallocating memory.
If you want to increase your image buffer and you will not be
using scalable fonts, add that memory into your image buffer.
Example {I,M,R,R,20 p Receive buffer 2K
M,T,R,10 p Transmit buffer 1K
M,D,N,80 p Downloadable fonts 8K
M,V,R,160 p Scalable fonts buffer 16K
M,I,N,3200 p } Image buffer 320K
Make sure memory is available before adding memory to a buffer.
In the above example, if the image buffer (M,I,N,3200) was
defined before the downloadable fonts and scalable fonts buffers
(M,D,N,80 and M,V,R,160) were defined, an error would have
occurred.
2-24 Configuring the Printer