Paxar 9403, 9402 manual 30Configuring the Printer

Command	Parameter
^CA	Cancels all the batches in the queue.
^CB	Cancels only the current batch being printed.
^DD or	Disables the MPCL data escape character (the tilde) and inhibits MPCL
^DCd	from acting on ANY data escape sequence from the host. Sets the MPCL
	data escape character to the ASCII value given by the d parameter. The
	value can be any ASCII character.
^EA	Aborts an error condition. This command is the same as pressing CLEAR
	(ESCAPE/CLEAR) to clear an error. May need to be sent multiple times.
	Use ^RB to reprint batch.
	CAUTION: Command causes the current batch to stop and the
	condition that caused the error to remain uncorrected.
^ER	Resets the error. This command is the same as pressing FEED
	(FEED/CUT) to acknowledge an error. Normal operation will resume.
^FD	Feeds a label when printer is idle. Simulates the operation of pressing
	FEED (FEED/CUT) and dispenses the next label if printer is in the
	on-demand mode. NOTE: Printer ignores this command if printing.
^FF1	Formats flash memory (9825/985x/9860 printers)
^FF2	Returns the amount (in bytes) of the available flash memory.
^GD	Disables conversion of formats designed in 203 dpi density dot units to 300
	dpi density.
^GE	Enables the conversion of formats designed in 203 dpi dot units (not
	English or Metric) to 300 dpi.
^ID or ^ICd	Disables the Immediate Command feature by turning off the Immediate
	Command escape character. Sets the Immediate Command escape
	character to the ASCII value given by the d parameter. The value can be
	any ASCII character.
^MC	Returns the customer ID or RPQ version to the host. (00 to 99)
^MD	Returns the printhead dot density to the host. 00 = 203 dpi 01 = 300 dpi
^MI	Returns the customer ID or RPQ revision level to the host. (00 to 99)
^MM	Returns the model number to the host. 11 = M9403 16 = M9850
	17 = 9825 18 = 9855 19 = 9860
^MP	Returns the prototype number to the host. (00 to 99)
^MR	Returns the revision number to the host. (00 to 99)
^MV	Returns the version number to the host. (00 to 99)

2-30Configuring the Printer