Paxar 9403, 9402 manual Status2, Packet Type

Models: 9402 9403

1 294
Download 294 pages 19.52 Kb
Page 160
Image 160

The following syntax is the response for a Job 3 request. You may need to press ENTER or FEED/CUT, depending on your printer before the job response is returned.

Syntax {J,"Status1 A,B","Status2

A,B,C,D,E","FMT-1","BCH-2"}

"Status1 A,B" Status1 A contains the field number, in the format or batch, where an error was found. If the error is not in the format or batch, a "0" is returned.

Status1 B contains an error number, which represents the actual printer error. The error numbers can be found in Chapter 8, "Diagnostics and Errors."

Example {J,"2,612",}

2 is the field number where an error was found. 612 is the error number, indicating that data is missing or does not match the format definition for that field.

Error numbers found in Status1 B, always have a value equal to or greater than 500. These are considered very serious errors.

"Status2 A,B,C,D,E" contains the packet type, field type, field

 

number, parameter, and error number.

Status2

represents the MPCLII packet that the error

A- Packet Type

occurred on. The packet could be Format (F),

 

Batch (B), Check Digit (A), Graphic (G), or

 

Font (W).

7-10Status Polling

Page 160
Image 160
Paxar 9403, 9402 manual Status2, Packet Type