D o w n l o a d i n g F i l e s

To download from a PC:

1.Check that the PC and the printer are connected.

2.Check that communications have been established between the PC and the printer.

3.Send the communication settings packet to select the printer’s communication settings. See "Defining the Communication Settings Packet" in Chapter 2 for more information (only used for serial communication). If you change the printer’s communication settings, make sure they match those at the host before sending any packets to the printer.

4.Type this command at the DOS prompt:

COPY LABEL1.FMT COM1 Transmits a file called "LABEL1.FMT" to COM1.

COPY LABEL1.BCH COM1 Transmits a batch called "LABEL1.BCH" to COM1.

If you use the COPY command to download your formats, set flow control to DTR (not XON/XOFF). Also, do not use the MS-DOS prompt from inside Windows, because you will get a framing error.

Refer to the Operator’s Handbook or keyboard’s Operating Instructions for offline data entry and more printing information.

Printing 6-3

Page 141
Image 141
Paxar 9402, 9403 manual W n l o a d i n g F i l e s