Creating a Verifier Configuration Packet
With the verifier configuration packet you can customize the
verifier for each format you print. You can select which bar codes
to scan, the acceptable ANSI grade levels, quiet zone,
X-dimension range, and more. You can download the PAXAR
Verifier Configuration Tool (from our Web site) to create this
packet or follow the syntax below.
Syntax {V,format#,action,device,"name" p
D,"vfr_comds" p }
V1. V Verifier Configuration
V2. format# Format number from 0-999 to identify the format number that
corresponds to this particular verifier configuration. (Use
format number 1 with care, because many sites have multiple
formats using one as the format number.)
NOTE: You can specify up to 50 different verifier
configurations for your formats.
V3. action Enter A to add a verifier configuration.
V4. device Storage device. Options:
FFlash. Stores the verifier configurati on in the printer.
Packets stored in flash memory are saved when the
power is turned off.
TTemporary. Passes the packet through the printer
and stores the packet in the verifier. Packets stored
in temporary memory are lost when the power is
turned off.
V5. "name" Packet name, 0-8 char acters, enclose within quotation marks.
The name you enter here is shown as a custom configuration
on the menu for MODE. Refer to your Operating Instructions
for more information.
D1. D Non-Printable Text/Data Field.
D2. "vfr_comds" Verifier commands. Must be enclosed within quotation marks.
Refer to the SV Series Operator’s Guide for the complete list
of verifier commands.
2-40 Configuring the Printer