Paxar 9402 F i n i n g t h e S u p p l y S e t u p P a c k e t, Supplytype,ribbonon,feedmode

Models: 9402 9403

1 294
Download 294 pages 19.52 Kb
Page 31
Image 31

Example {I ,A,0,0,1,1,0 p }

Powers up the printer in the online mode, displays prompts in English, prints a separator after each batch, prints zeros with slashes through them, and uses the internal symbol set.

D e f i n i n g t h e S u p p l y S e t u p P a c k e t

Use the supply setup packet (B) to select supply type, ribbon, feed mode, supply position, and cut position.

Syntax

{I ,B,supply_type,ribbon_on,feed_mode,

 

supply_posn,cut_posn,skip_index p}

B1. B

Supply Setup Packet

B2. supply_type Supply Type. Options:

 

0

Black mark supply

 

1

Die Cut/edge aperture supply (default)

 

2

Continuous (non-indexed) supply (9825/985x)

 

3

Center Aperture supply (985x/9860)

 

 

Must use with printer applicator

 

NOTE: You must use continuous supply in continuous mode.

 

 

Do not use continuous supply with extended

 

 

backfeed or 94x5 emulation. If your aperture supply

 

 

has holes on the edge, use 1. If your aperture supply

 

 

has holes in the center, use 3.

B3. ribbon_on

Ribbon. Options:

 

0

Ribbon not installed (default for 9403)

 

1

Ribbon installed (default for 9825/985x/9860)

 

2

High Energy Ribbon installed (985x/9860)

 

You must use a print speed of 2.5 IPS with the high energy

ribbon. Serial bar codes cannot be printed using the high energy ribbon. Settings for ribbon and supply type must match the supplies loaded in the printer; otherwise, an error occurs. To clear the error, turn off the printer and change the configuration packet. Turn on the printer and resend the packet.

B4. feed_mode Feed Mode. Options:

0Continuous operation (default)

1On-demand mode

Configuring the Printer 2-11

Page 31
Image 31
Paxar 9402, 9403 manual F i n i n g t h e S u p p l y S e t u p P a c k e t, Supplytype,ribbonon,feedmode