Turn on the printer and make sure it is ready to receive data before you download. See your host’s documentation, system administrator, or "Downloading Methods" for information on ways to download.

When downloading, send your packets in this order:

1.Memory configuration packet (M)

2.Configuration packets (A-G)

3.Any of the following:

Check digit packets (see Chapter 4)

Format packets (see Chapter 3)

Graphic packets (see Chapter 5)

4.Batch data (see "Defining the Batch Header")

F o r m a t t i n g F l a s h

Before you send packets to flash memory, it must be formatted first. This is required once during initial printer setup. On the 9800 series printers, from the Main Menu, select Setup, Flash Memory, then Format Flash. The process takes a few minutes.

When you format flash memory, the script and any downloaded TrueType® fonts saved in the printer’s flash memory are deleted and must be resent to the printer. Refer to your printer’s Operator’s Handbook for more information.

6-2Printing

Page 140
Image 140
Paxar 9403, 9402 manual R m a t t i n g F l a s h