Furuno FELCOM 12 manual Setting a message report, Nav+Sea Inf

Setting a message report

1. Press [F5] to display the Position Reports menu.

Position Reports

1.Data Report

2.Message Report

3.Data Network ID

Figure 5-4 Position reports menu

2.Press [2] to display the Message Report.

3.Press [1], [2], [3] or [4] to set addressee desired. You can set four addressees.

	Message Report
PIN Code
INT	*********
Message Report Programming
Status	OFF
Station Name
Destination Type	TELEX
Country/Ocean Code
Station ID
Modem Type
Subject
LES ID
Activation	Regular Interval
Interval Time	00:10
Report Times	1 (- - - : No Limit)
Start Time1	- - : - -
Start Time2	- - : - -
Start Time3	- - : - -
Start Time4	- - : - -
Report Contents	NAV+SEA INF

Figure 5-5 Message report menu

4.Press [Enter] to open the window for PIN code entry.

5.Key in the PIN code.

PIN code (max. 8 digits) should be agreed upon with your recipi- ent beforehand.

6.Press [Enter] to close the window.

7. Press [

/

].

8.Press [Enter] to open the selection window.

9.Select “ON” or “OFF”.

ON: Message report on

OFF: Message report off

10. Press [Enter] to close the selection window.

11. Press [

/

].

12.Press [Enter] to display the station list.

13.Select a station.

5-4