Furuno FELCOM 12 manual

14.Press [Enter] to close the station list.

15.Press [↓ ] to place the cursor on the LES ID line.

16.Press [Enter] to display the LES list.

17.Select LES.

18.Press [Enter] to close the LES list.

Note: If the item "Activation" below is set to "Daily", do the following steps:

1)Press [↓ ] several times to select Report Times.

2)Press the [Enter] key to show the screen for entry of trans mission quantity.

3)Press the [0] key or [Backspace] key to set No Limit.

4)Press the [Enter] key to close the screen.

19.Press [↓ ].

20.Press [Enter] to open the selection window.

21.Select “Regular Interval” or “Daily”.

22.Press [Enter] to close the selection window.

23.Press [↓ ].

`When “Regular Interval” is selected on step 21,

(1)Press [Enter] to open the window for interval time entry.

(2)Key in the interval time.

(3)Press [Enter] to close the window.

(4)Press [↓ ].

(5)Press [Enter] to open the window for report times entry.

(6)Key in the report times or select “No Limit”.

(7)Press [Enter] to close the window.

`When “Daily” is selected on step 21,

(1)Press [Enter] to open the window for start time entry.

(2)Key in the start time.

(3)Press [Enter] to close the window.

(4)Press [↓ ].

(5)If necessary, key in the start time of Start Times 2-4.

24.Press [↓ ].

25.Press [Enter] to open the selection window.

26.Press [↑ ] or [↓ ] select the contents of message report.

NAV: Position, speed, bearing

NAV+SEAINF: Position, speed, bearing, water temperature, current, depth

5-5