Furuno FELCOM 12 manual Automatic printing of display log

display log description

S/R:	Send or Receive message
Message No.:	Message no. or file name
Type:	Currently, TELEX, PSTN, PSDN or SPEC
Pri:	(2-digit code service).
	Normal or distress
Date:	Date message was received (or transmitted).
Time:	Time message was received (or transmitted).
LES:	ID of LES which handled the message
Station:	Transmitting station name. Blank for unreg
Size:	istered station or receive message.
	Size of message in bytes
Cond:	Transmission results. Blank if receive
Success:	message.
	Successful transmission
Fail:	Failed transmission
Rejected:	Message rejected by LES

Automatic printing of display log

The Display Log can be automatically printed every 24 hours.

1.Press [F8] to display the Setup menu.

2.Press [6] to display the Auto Mode Setup menu.

				Setup
			Auto Mode Setup
	Auto Log Print				OFF
	Receive Alarm				ON
	Auto Telex Msg Save				ON
	Auto EGC Msg Save				OFF
	Data Report & Polling Print				ON
7.		E-Mail Setup
8.		Directories
9.		Configuration

Figure 4-38 Auto mode setup menu

3.Press [Enter] to open the selection window of Auto Log Print.

4.Set Auto Log Print to ON.

5.Press [Enter] to close the selection window.

6.Press [Esc] twice.

4-27