Furuno FELCOM 12 manual Setting the receive alarm, Display log, Printing, Saving and filing

3) display log

The Display Log shows message number, priority, date and time of transmission, LES ID and file size (in bytes) of the latest 50 received and transmitted messages.

4) printing

Printing of a message begins (except messages with passwords) as soon as it is received.

5) saving and filing

The DTE saves and files a receive message to the Display Message List. (For installations with both a main and a 2nd DTE, you may select where to store receive messages, on the system setup menu.) The Display Message List shows the following:

Receive message no.

LES ID

Priority

File size (in bytes)

Message classification

Password for confidential messages

Date and time of transmission

Status

Setting the receive alarm

An audible alarm may be set to ring when a routine message is re- ceived. The factory setting is OFF.

1.Press [F8] to display the Setup menu.

2.Press [6] to display the Auto Mode Setup.

				Setup
			Auto Mode Setup
	Auto Log Print				OFF
	Receive Alarm				ON
	Auto Telex Msg Save				ON
	Auto EGC Msg Save				OFF
	Data Report & Polling Print				ON
7.		E-Mail Setup
8.		Directories
9.		Configuration

Figure 4-28 Auto mode setup menu

3. Press [

/

] to send the cursor to the Receive Alarm line.

4.Press [Enter] to open the selection window.

5.To enable the alarm, select ON. The alarm will be released for one second when a message is received.

4-21