Furuno FELCOM 12 manual Enabling/Disabling Dnid, Sample MES signalling channel printout

Note: DNID with “*” mark are available for use(Refer to Figure 5-11).

POLLING Message		- - - Program Unreserved Data Reporting - - -
DNID	: 0004	LES ID	: 101 (Southbury)
Sub Address : 000		Member Number : 001 Response: No Response
Receive Data & Time: 97-04-15 00:01 (UTC)
Start Frame: 00030		Interval: 00030

97-04-15 00:01 (UTC)

Data Report Program has been initiated by Polling.

POLLING Message		- - - Initiate Unreserved Data Reporting - - -
DNID	:0004	LES ID		:101 (Southbury)
Sub Address : 000		Member Number :001 Response: Data Report
Receive Data & Time: 97-04-15 00:01 (UTC)
Start Frame: 00030		Interval: 00030
Data Reported (Poll Response)
LES	:Southbury		Date	: 97-04-15
DNID	:00004		Time	: 00:03 (UTC)
Member No. :001
Position	LAT	10:14.03N
	LON	124:36.81E

97-04-15 00:06 (UTC) Successful Data Report Sending.

Figure 5-11 Sample MES signalling channel printout

Enabling/Disabling DNID

DNID can be enabled or disabled as follows:

1.Press up/down arrow key to place the cursor on the desired DNID.

2.Press [Enter] to enable the DNID. (* mark appears.) Press [Enter] to disable the DNID. (* mark disappears.)

Note: When a DNID is disabled “running data program (poll)” is displayed and polling is cancelled.

3.Press [Esc] to close the window.

4.To return to the standby display, press [Esc] twice.

Note: “Disable”not permitted in FFA version.

5-10