Furuno FELCOM 12 manual Press Enter to open the Waypoint window, Offon Navtex OFF

13. Press [Enter] to open the Waypoint window.

	Setup		EGC Setup
Receive EGC Area
Additional Position				:		:
	Navarea
Fixed Area
Waypoint (from NAV Equipment)					OFFON
NAVTEX					OFF
Station Code
Type of Message (Can’t reject other report)
Ice reports		OFF			OMEGA messages		OFF
Meteo. forecasts		OFF			SATNAV messages		OFF
Pilot service		OFF			Other navaid msg		OFF
DECCA messages		OFF			QRU (no message)		OFF
LORAN messages		OFF

Figure 2-24 EGC setup screen, waypoint

14.Select ON to receive broadcasts for the area of a destination waypoint selected on the navigation device.

15.Press [Enter] to close the Waypoint window.

16. Press [

/

] to advance the cursor to the Station Code line.

17. Press [Enter] to open the Station Code window.

	Setup		EGC Setup
Receive EGC Area
Additional Position				:	:
	Navarea
Fixed Area
Waypoint (from NAV Equipment)				OFF
NAVTEX
Station Code
Type of Message
Ice reports		OFF		OMEGA messages		OFF
Meteo. forecasts		OFF		SATNAV messages		OFF
Pilot service		OFF		Other navaid msg		OFF
DECCA messages		OFF		QRU (no message)		OFF
LORAN messages		OFF

Figure 2-25 EGC setup, station code

18.Enter the navtex station code (A-Z) of the navarea. For details about navtex stations, consult the operator’s manual of the navtex receiver.

19.Press [Enter] to close the Station Code window.

20.Using the up/down arrow keys enable/disable reception of NAVTEX broadcasts and press [Enter].

Note that navtex message types “Coastal navigational informa- tion”, “Meteorological warning” and “Search and rescue alert” (they do not appear on the display) cannot be deleted since they are considered essential to navigation.

2-14