Furuno FELCOM 12 manual Dnid

Error message	Meaning	Action
Data Report	DNID (Data reporting	Select LES having
failed,	Network ID) not set.	DNID.
unauthorized
DNID.
WARNING:	BBER (Bulletin Board	Select NCS
BBER over	Error) rate exceeded 80%.	manually or
80%. Scanning		automatically.
NCS start
manually.
WARNING:		If could not be
Can not find		found NCS CC,
NCS CC in		contact your
preferred		dearer to request
region.		repair.
Scanning all
region is
started.
TROUBLE:	Tx current could not, at	Check system
Carrier power	transmission, be detected	status monitor for
level.	by SW REG.	send.
TROUBLE:	Synthesizer circuit failure.	Request repair.
Synthesizer
UNLOCK.
WARNING:	Could not save Rx	Turn on the
Memory Full for	message.	Terminal Unit of
receive		connecting DTE1.
message.
WARNING:	Communication between	Check the
Message	DTE1 (Terminal Unit) and	connecting
received for	Communication Unit failed.	between DTE1
DTE1 PORT.		and
Please turn on		Communication
DTE1 port		Unit or turn on
equipment.		Terminal Unit.
WARNING:	No navigation data input	Check navigation
External NAV	from navigation device.	device.
equipment
failure.
INF: Please	Current ship position is not	Update current
update current	updated.	ship position.
ship position.
WARNING:	GPS signal could not be	Internal GPS unit
Internal GPS	detected.	might be damaged
UNIT failure.		if this message is
		displayed
		frequently. Contact
		your dealer to
		request repair.
Ignored: PV	You attempted to conduct
TEST has been	PV test when PV test is
already started,	already pending.
and now
pending.
LES hardware	LES can not receive	Tx system is
error detected.	message or message was	unstable or
	not accepted five times.	equipment trouble.

8-12