Furuno FELCOM 12 manual Canceling transmission, Santa Paul, NCS POR Login

Note: If a file name which was entered manually does not exist when you attempt to transumit the file at step 13. “Input Error: Message File” appears. Press any key to erase the error message then enter correct name.

Canceling transmission

As noted earlier a transmit message is held in the buffer, usually until it is transmitted satisfactorily. To cancel transmission on a message held in the buffer, do the following:

1.Press [F3] to display the Transmit menu.

2.Press [2] to display the Cancel screen.

File Edit Transmit EGC		Reports Logs Options Setup Position StopAlarm
	Transmit	<[1] UNTITLED1>

1.	Transmit Message
2.	Cancel
			Cancel
3.	Request Delivery Status
		LES		Priority	Send Status Delivery
No. Message File Station
01 edit_msg.001		SANTA PAUL		Normal	Waiting

*---- ---------		+---------	+---------	+---------	+---------	+	---------	+---------	<
	ASCII		25 Char.	[ Line	2/ 2	Col.	1 ]	[Insert	]
Current State: IDLE				SYNC ( NCS )				97-08-08 07:37 (UTC)
				NCS: POR		LOGIN
DCE Ver **

Figure 4-20 Sample cancel screen

Send status

Waiting: Waiting to transmit message.

Sending: Now sending message.

Fail: Failed transmission

Rejected: Message rejected by LES.

Pending: LES circuits occupied.

3. Select message you want to cancel.

4-13