Furuno FELCOM 12 manual Programming EGC channels, EGC setup screen, update window

21. Press [Esc] to open the update window.

	Setup		EGC Setup
Receive EGC Area
Additional Position				:	:
	Navarea
Fixed Area
Waypoint (from NAV Equipment)				OFF
NAVTEX
Station Code
Type of Message (Can’t reject other report)
Ice reports		OFF		OMEGA messages			OFF
Meteo. forecasts		OFF		SATNAV messages			UpdateOFF
Pilot service		OFF		Other navaid msg			OFF
DECCA messages		OFF		QRU (no message)		YesOFF No
LORAN messages		OFF

Figure 2-26 EGC setup screen, update window

22.Press [Enter] to select “Yes” and register all EGC settings.

23.Press [Esc] to return to the standby display.

Programming EGC channels

The EGC Channel List in the Setup menu stores EGC channels.

There are currently four EGC channels, one for each satellite. These four channels are pre-programmed into the unit and marked in the EGC Channel List with asterisks. When more EGC channels become available you can add them to the list.

1.Press [F8] to display the Setup menu.

2.Press [9] to display the Configuration menu.

3.Press [3] to display the EGC Channel List.

File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm

Setup

Configuration

EGC Channel List

ENT: set ESC: quit

11080* 12580* 10840* 11088*

Figure 2-27 EGC channel list

4.Current EGC channels are marked with an asterisk. These chan- nels cannot be changed.

5.With the arrow keys place the cursor where there is no data en- tered.

2-15